Saturday, 15 November 2008

Ultimate Scorpio Reference

This is everything I can find for the Scorpio model from Blakes 7. If I find more (or if anyone sends me more) I'll update this post.




































More reference here: http://smallspaceships.blogspot.com/2008/06/titan-finds-scorpio.html

Thursday, 13 November 2008

Rare Scorpio Picture

Glazy sent me this picture of the Scorpio model from Blake's 7. Pictures of the model are rare and this one looks like it might have been scanned in from a magazine. (See my earlier post for more pictures). The detail is really nice and it once again proves that what was seen on screen didn't do justice to the craftsmen who made them.
We've been having some building work done at home over the Summer so I've had most of my collection boxed away. I hope to be able to resume normal posts again soon.

Update
Glazy sent me this info: The 3 shooting miniatures of the Scorpio were 4 foot, 16 inches and 5 inches.

Monday, 11 August 2008

Liberator Spotters Guide - Part 2 (updated)

DSV 2
A common mistake is to label the Liberator as DSV1, or Deep Space Vessel 1. This is an error that seems to have surfaced with Comet Miniatures release but is repeated even today with Titan Find's kit.
Apologies in advance for being pedantic but the ship is clearly identified in the episode Redemption as DSV 2, (see clip, about half way through).

Here is the Comet Miniatures Box art, clearly labelled as DSV 1.


How big is The Liberator?
The size of the Liberator was never stated on screen or in any official literature. The scale seems to conflict in different episodes depending on the relative size of other models produced. I got the impression it was meant to me a huge ship but we never got to know. But if we take the first appearance of the Liberator where we see it next to the Prison Ship London we can deduce its apparent size. (Warning, this gets really geeky!)


Looking at this picture above of the London, the circular connecting tube hatch is approximately 2 meters in diameter – big enough for a man to cross. This makes the length of the ship approx 30 meters.

Now compare this to the size of the Liberator in this picture. We know the London is very close to the Liberator as it uses its connecting tube to dock with the Liberator. The London fits about 10 times into the length of the Liberator so I would put it at about 300 meters from engine to end of prongs. (smaller than I’d imagined it to be!) This is just my own theory , if you can suggest an alternative please leave a comment.



Update

Glazy sent me the following compilation of grabs from the DVD, see his comment below for further details.

There are several instances during the series where we see closeup detail on the surface of the Liberator that is difficult to reconcile with the wider shots without presuming its absolutely massive. Personally I've always seen it as being very very big and perhaps my efforts to pin down its size are missing the point and removing some of its mystery. Whatever you think this is a big old ship.

With regard to Glazy's note about the Flight Deck location this is another mystery. The novelisation describes a lift just inside the airlock that turns are rises rapidly suggesting the Flight Deck could be somewhere totally different.

Friday, 27 June 2008

Titan Find's Scorpio

This is one to save up my pennies for. If you're not in your 30's and from the UK you might not recognise this gem. It's the Scorpio, the 'other' ship from Blakes 7. The Liberator was a tough act to follow but over the years I've warmed to this particular hunk of junk.
Now Titan Find are releasing a great kit, details are still a bit sketchy but the pictures on their website look pretty good to me. You can view an earlier post about the Scorpio here.
Here are a few reference image I've collected from a number of sources.